Checked by NextRoleHub · Posted 17 Nov 2026 · Updated 18 Nov 2026
Project Engineer is a Kampala-based engineering role with East African Crude Oil Pipeline (EACOP), featured among jobs in Uganda for experienced oil-and-gas professionals. The Project & Modification Engineer will coordinate project and equipment changes, move validated work from planning into implementation, and support commissioning and handover. The advert describes responsibilities across engineering, design, quality planning, installation, scheduling, cost control, documentation and contractor coordination. Applicants need an engineering degree or equivalent and at least five years in oil and gas, major project engineering or a project-engineering role. A master’s in Engineering Management is an added advantage; the advert also lists Tanzania ERB professional registration and says PMP is highly desired. The post is based in Kampala with travel to remote sites; apply through the official Q-Sourcing portal by Sunday, 29 November 2026, 8:00 AM.
Job Overview
- PositionProject & Modification Engineer
- CompanyEast African Crude Oil Pipeline (EACOP)
- LocationKampala, Uganda
- Job TypeFull Time
- CategoryEngineering, Operations
- IndustryOil and gas pipeline infrastructure
- DeadlineSunday, 29 November 2026, 8:00 AM
- Not in the advertDepartment, pay and benefits
About The Company
The East African Crude Oil Pipeline (EACOP) is a cross-border export pipeline project running from Kabaale in Hoima District, Uganda, to the Chongoleani Peninsula near Tanga Port, Tanzania. EACOP’s official site describes a 1,447-kilometre route connecting Uganda’s Lake Albert oilfields with the Tanzanian coast.
EACOP says the pipeline will carry crude oil from Uganda’s Lake Albert fields to Tanga for onward export. Its careers page names Q-Sourcing among the authorized recruitment partners for Uganda and states that the company does not charge recruitment fees.
About The Project Engineer Role
Based in Kampala, the Project & Modification Engineer supports EACOP project changes from planning through implementation. The advert describes the post as managing the modification workflow, acting as a focal point for technical study requests and master-data updates, and developing work scopes for approved changes. It covers project scheduling, resources, risk, cost, engineering, design, quality planning, installation, commissioning and handover. The engineer also reviews deliverables, prepares proposals and reports, and develops procurement scopes and method statements.
The role works with technical teams, departments, stakeholders, suppliers, consultants and contractors, and supports the Maintenance and Inspection Methods Engineer with EACOP technical documentation, drawings, 3D models and CMMS records. Travel to remote sites is expected for coordination and handover. Applicants need an engineering degree or equivalent and at least five years in oil and gas, major-project engineering or a project-engineering role. A master’s in Engineering Management is an added advantage; the advert also lists Tanzania ERB professional registration and says PMP certification is highly desired.
Is This Job For You?
- Career level: Experienced project engineering professional; the advert asks for at least five years in oil and gas or major-project engineering.
- Good fit if: You hold an engineering degree or equivalent and have at least five years in oil and gas or major-project engineering.
- Good fit if: You can coordinate project scopes, modifications, budgets, schedules and technical teams.
- Good fit if: You can work in Kampala and travel to remote sites for implementation and handover.
- Read before applying: Oil and Gas Jobs in Uganda and How to Write a CV in Uganda
Key Responsibilities
In plain terms, this job splits into 5 areas of work. Each list below restates the employer’s duties in shorter words; the advert linked under How To Apply is the final word.
Project set-up and scope
This work brings technical disciplines together, defines delivery needs and establishes controls for resources, costs, risks and design.
- Coordinate engineering, design, quality, modification, installation and commissioning work while keeping delivery within budget.
- Lead projects or modifications through initiation, planning, execution and close-out.
- Keep modification spending within approved project budgets.
- Define project resources and arrange subcontracted work where needed.
- Assess risks in change requests and set corrective actions.
- Verify designs and approve project progress reports.
Scheduling and coordination
Regular planning and communication keep delivery on schedule, surface issues early and maintain clear records of project changes.
- Prepare and manage schedules so project work finishes on time.
- Take on assigned special projects and support continuous improvement.
- Prepare project portfolio updates and present progress to stakeholders.
- Investigate root causes and resolve project problems.
- Coordinate with departments, stakeholders, suppliers, service providers and contractors.
- Maintain project records and control documentation for EACOP modifications.
Technical assurance and planning
The engineer applies safety and technical controls while shaping improvement proposals and approved changes to project facilities and equipment.
- Apply H3SE policies and Life Saving Rules during delivery, and ensure project work is completed safely.
- Keep project work aligned with applicable codes, policies, performance standards, regulations and specifications.
- Participate in HAZOP reviews for relevant work.
- Develop improvement proposals and prepare related engineering methods and execution plans.
- Prepare, justify, coordinate, implement and monitor approved strategic projects, equipment modifications and new equipment for process, utility, facility and plant.
Quality, documents and site safety
This area covers engineering methods, cost review, quality checks, controlled records and safe working conditions around project activity.
- Prepare method statements for proposed improvement projects.
- Review cost estimates and recommendations from vendors, consultants and licensors.
- Monitor budgets, schedules and plans, and report project status regularly.
- Review engineering submissions and start corrective follow-up where necessary.
- Set document-control and drafting procedures for orderly storage and retrieval.
- Keep project areas clean and safe through good housekeeping and safe work practices.
Procurement, data and HSE
The role supports procurement preparation, project reporting, master data, contractor oversight and a consistent safety culture across the work.
- Prepare TORs and BOQs for outsourced contractors or consultants, and assist with the project unit’s annual budget.
- Produce periodic or focused project activity reports and manage modification workflows.
- Support the Maintenance and Inspection Methods Engineer with EACOP documents, drawings, 3D models and CMMS records.
- Manage engineering service contractors, contribute to HSE aims and carry out other relevant assigned duties.
- Stay alert to unsafe conditions and raise H3SE concerns and improvement ideas with management.
- Take part in HSEQ and encourage this culture among colleagues while keeping workspaces safe, clean and neat.
Qualifications & Requirements
Required Education
- BSc degree-level qualification in an engineering discipline, such as mechanical, electrical, instrumentation and control, chemical and processing, civil, or an equivalent qualification from a recognised institution.
- A Master’s degree in Engineering Management (MEM) will be an added advantage.
Work Experience
- Not less than five years of experience in the oil and gas industry, major project engineering, or working as a project engineer.
Additional Requirements
- Professional Engineer (P. Eng.) registration with the Tanzania Engineers Registration Board (ERB) is specified.
- Project Management Professional (PMP) certification is highly desired.
- Advanced Microsoft user, including Project and Excel, and good MS Office experience.
- Fluency in spoken and written English.
- The advert asks for knowledge of mechanical, piping, steel-structure installation, pre-commissioning on live plants and E&I experience.
- The advert also calls for progress reporting, communication, problem-solving, work across multiple disciplines and ability to work under pressure.
Skills & Competencies
Technical Skills
- Project planning and scheduling: Prepare project schedules and execution plans and manage work to planned completion times.
- Microsoft Project and Excel: The advert asks for advanced Microsoft skills, including Project and Excel.
- Engineering modification delivery: Coordinate engineering methods, equipment modifications, installation, commissioning and handover.
- Technical master data: Support EACOP documentation, drawings, 3D models and CMMS records.
- Cost and project control: Monitor budgets, schedules and plans, and review cost estimates and vendor recommendations.
Soft Skills
- Communication and reporting: Coordinate with stakeholders and present project progress clearly.
- Problem solving: Investigate project root causes and develop corrective actions.
- Multi-disciplinary teamwork: The advert expects coordination across departments, technical teams, vendors and contractors.
- Safety awareness: Follow H3SE policies, Life Saving Rules and safe-work practices, and report concerns.
- Working under pressure: The advert specifies ability to work under pressure and in stressful conditions.
Benefits
No pay figure is given for this Project Engineer post, so raise it only after an offer. To judge an offer, check a gross figure with the Uganda take-home pay calculator (PAYE and NSSF) and compare it with our guide to how to negotiate salary in Uganda.
Why Apply
- Coordinate project and equipment modifications from planning through commissioning and handover.
- Work across engineering, design, quality, installation and project-control activities.
- Support EACOP technical records, including drawings, 3D models and CMMS data.
- Prepare schedules, methods, project proposals, progress reports, TORs and BOQs.
- Coordinate with technical teams, stakeholders, suppliers, consultants and contractors.
- Apply oil-and-gas or major-project engineering experience in a Kampala-based role with site travel.
How To Apply
Apply through the Q-Sourcing application page under the vacancy “QSSU-EACOP-PME-PROJECT & MODIFICATION ENGINEER”. Applications close no later than 8:00 AM on Sunday, 29 November 2026; the advert does not specify a timezone. Only shortlisted applicants will be contacted.
Application Tips
- Show at least five years of oil-and-gas or major-project engineering experience.
- Give examples of project engineering, equipment modification and change-management work.
- List your engineering degree and any Tanzania ERB registration or PMP certification.
- Name your experience with Microsoft Project, Excel and other stated MS Office tools.
- Describe your work on engineering scopes, methods, schedules, installation or commissioning.
- Mention experience maintaining technical documentation, drawings, 3D models or CMMS records.
- Submit through the Q-Sourcing portal before 8:00 AM on 29 November 2026.
Before You Apply
- Applications go through jobs.qsourcing.com. Create your account early and keep your CV in a simple layout; our guide to applicant tracking systems explains why.
- If a gross salary is stated, check your take-home pay after PAYE and NSSF with the free salary calculator. When you are shortlisted, prepare with interview questions and answers for Uganda.
How NextRoleHub Verified This Job
- Checked on 17 November 2026 against East African Crude Oil Pipeline (EACOP)'s official advert.
- Closing date confirmed as 29 November 2026. NextRoleHub closes the listing at 23:59 Kampala time that day.
- The application link goes to the employer's own page or email. Applying is free; report anyone who asks for money.
Apply on the East African Crude Oil Pipeline (EACOP) portal
Apply Now at East African Crude Oil Pipeline (EACOP) →Not sure your CV fits? Tailor my CV to this job →
Links to jobs.qsourcing.com · never to a NextRoleHub paywall
Get new Engineering jobs every Monday
One email a week with every new role in Uganda, closing dates included. Free, no spam, unsubscribe in one click.
Get jobs on WhatsApp
Every new role sent to your phone the moment it is published. No data-heavy app required.



